Here’s everything you need to know about these:

Prosport Shortened Drop Links for MINI

Key Features:

All steel construction.
Reduces strain on OEM – specification components after lowering.
Corrosion-resistant finish.

Compatibility:

These Prosport Shortened Drop Links are suitable for these MINI models:
R50 (Mk1 One and Cooper Hatchback).
R52 (Mk1 One and Cooper Convertible).
R56 (Mk2 First, One and Cooper Hatchback).
R57 (Mk2 One and Cooper Convertible).
R55 Clubman (Mk1 One and Cooper).

Not suitable for R53, R55 or R56 Cooper S models.

Why are they needed?

Depending upon the model, sometimes after lowering a car the OEM drop links simply won’t fit because they are too long. This is because the distance between the upper and lower mounting points of the original anti-roll bar link can be reduced.
Shortened drop links prevent excessive strain from being applied to the links and mounting points.
So, fitting a set of Prosport Shortened Drop Links will bring these benefits:
• Prevents strain on the drop link ball joints and mounting bracket.
• Avoids premature wear on the ball joints.
• Prevents contact with drive shafts or other components, avoiding noise and reduces the risk of damage.

Specifications in Detail:

Length: 160mm.
Thread size: M10.

Good to Know:

Drop links can also be called “Anti-Roll-Bar Links” or “Sway Bar Links”.
These Prosport Shortened Drop Links are a direct replacement for the OEM parts.
Do not use an air-ratchet/electric gun or similar to tighten the nuts – this can damage the ball joints, rubber boots or threads. There is a hex recess in the end of the threaded section to enable use of a H4 allen key to prevent rotation whilst fitting the nut. Also, a slimline 15mm spanner can be used on the flattened surfaces at the base of the threads.

In the Box:

Front shortened drop link x2.
You’ll need the following tools to fit these Shortened Drop Links:
H4 Allen Key or Slim-line 15mm Spanner.
17mm Ring Spanner.

Prosport Shortened Drop Links for MINI